TM 5-3610-253-14
(5) Using adjusting screws located on either side of mounting pedestal, move
glass rule from side to side until pencil mark on OMI screen coincides with edge of
projected graduations.
(6) Turn off power.
(a) Turn main power switch to 0 position.
(b) Lock safety lock with operator key.
Turn on circuit breaker.
a.
b. Unlock safety lock using operator key.
c.
Rotate main power switch to on (I) position.
d.
Press control power on switch.
e.
Move backgauge to desired cut length.
5-55
