TB 1-4920-443-35
Table 53-7 Variable Names
VARIABLE NAME
VALUE
COMMENT
SHAFT ID:
Dyno xx, Shaft xxxx
tqsc
28367.86
Torque Full Scale
tqch
26949.47
Torque Calibrated High
Tqcm
13474.73
Torque Calibrated Medium
Tqcl
0000
Torque Calibrated Low
Modpc
From Shaft
Modulus % (must be entered by user)
Tcoef
250.0
Temperature coefficient ppm/C
Topc
From shaft
Torque offset % full scale
Spsc
25000.0
Speed full scale
Spch
28572
Speed calibrated high
Spcl
4395
Speed calibrated low
a_spdcmp
1.33E-03
Speed compensation factor
B_spdcmp
-1.33E-06
Speed compensation factor
C_spdcmp
0
Speed compensation factor
D_spdcmp
1.33E-03
Speed compensation factor
E_spdcmp
-1.33E-06
Speed compensation factor
f_spdcmp
0
Speed compensation factor
Rpm_br
7000
Speed break frequency (-1 disables)
Sensors
1
Single (1) or dual sensor (2)
Channel
0
Primary channel #
Speed max
20000
Analog output, maximum speed value
Speed min
-20000
Analog output, minimum speed value
Torq.max
24000
Analog output, max torque value ft-lb
Torq.min
-24000
Analog output, min torque value ft-lb
Temp max
510
Analog output, max temperature
Temp min
0
Analog output, min temperature
Power max
10000
Analog output, max power
Power min
-10000
Analog output, min power
