ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039-12&P
(1) Hold alignment pin with 5/8-inch open-end wrench.
(2) Loosen locking nut with 5/8-inch wrench followed by nut with 11/16-inch wrench.
(3) Position alignment pin until it mates freely with the pinhole in the frame's bottom rail.
(4) Hold the position of the alignment pin with 5/8-inch wrench and tighten both nut and locknut.
(5) Repeat steps (1) through (4) for the other alignment pin, if necessary.
f.
Secure Mounting Brackets and T-Handles.
Secure opposite rail of the IPADS frame not secured by alignment pin bracket to floor plate with two
mounting brackets and two T-handle bolts, figure 2-10.
Brackets
T-Handle Bolts
