TM 5-6675-328-14
Table 7-5. DIRECT/GENERAL SUPPORT TROUBLESHOOTING PROCEDURES
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
Be extremely careful when making voltage checks. Use insulated test probes only. Do not touch any
internal components of the battery charger while it is being tested. Death or serious injury may result.
1.
NO DC OUTPUT WHEN ANY OF THE VOLTAGES ARE SELECTED ON THE CHARGING RATE SWITCH
AND THE TIMER IS TURNED ON.
Step 1.
Check for continuity of internal circuit breaker.
(a) If continuity exists, proceed to step 2.
(b) If no continuity exists, replace circuit breaker (paragraph 7-20.4).
7-17