TM 5-6675-328-14
7-20.3
Replace TIMER.
MOS:
35E, Special Electronic Devices Repairer
TOOLS:
1/4 in. Nutdriver
3/16 in.
Nutdriver
SUPPLIES:
TIMER
WARNING
Electric shock hazard. Power cord must be disconnected prior to removing case wrapper. Death or
serious injury may result.
a.
Turn CHARGING RATE switch to OFF.
b.
Unplug power cord.
c.
Remove screws, handle, and case wrapper.
d.
Pull off control knob. Remove two screws and pull out TIMER.
e.
Tag and disconnect wires and remove TIMER.
f.
Connect wires to new TIMER.
NOTE
Be sure to keep screws centered in panel when tightening.
g.
Reinstall TIMER, screws, and control knob.
h.
Reinstall case wrapper, handle, and screws.
7-22
