TM 5-6675-328-14
Table 7-4. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM TO BE INSPECTED
For Readiness
ITEM
IN-
Reporting,
NO.
TER-
Equipment Is
VAL
PROCEDURE
Not Ready/
Available If:
BATTERY CHARGER
1
M
Service - Cont
3.
Use clean cloth moistened with water and cleaning
concentrate to remove dirt and moisture from ex-
terior surfaces.
4.
Operate CHARGING RATE switch and TIMER switch
through their entire ranges. Check for free
operation without binding and positive action in
each position.
5.
Repair any cuts or cracks in the insulation of the
ac power cord by covering damaged area with insu-
lation tape.
6.
Replace loose or missing screws on cover, handle, and
foot assembly.
7-15.
ORGANIZATIONAL TROUBLESHOOTING PROCEDURES . There are no organizational troubleshooting
procedures assigned for this equipment.
7-16.
MAINTENANCE PROCEDURES . There are no organizational maintenance procedures assigned for this
equipment.
7-17.
PREPARATION FOR STORAGE OR SHIPMENT . Contact your battalion for packing and shipping instructions.
7-15
