TM 5-6675-325-14
(16) Trace boundary line of shape using dot in 1 ens tracing assembly. Stop
when you reach starting point.
(17) Press remote tracer switch to activate actuate function and freeze count.
(18) Press foot switch to activate PRINT command. Calculator will print area
of shape in square feet or square feet and acres.
(19) To measure several shapes, keep foot switch and remote tracer switch
depressed.
(20) Reposition planimeter to next shape and repeat steps 11, and 15 through
18.
(21) To change functions or change scale of next shape to remeasured, press
q
and repeat steps (14) through (18).
P.
Pleasuring areas to be added and/or subtracted.
(1) Assemble QPS with planimeter.
(2) Activate QPS:
(a) Plug foot switch into PRINT input jack on back panel of auto-scaler.
(b) Plug remote tracer switch into ACCU input jack on back panel of
auto-scaler.
(c) Plug planimeter into E2 encoder socket on back panel of auto-scaler.
(d) Plug power transformer cable into power supply jack on back panel of
auto-scaler.
(e) Plug power transformer cable into wall outlet.
(f) Plug power cord into back of calculator.
(g) Plug power cord into wall outlet.
(h) Set
(i) Set
(j) Set
(k) Set
(l) Set
(m) Set
(n) Set
(o) Set
encoder 0FF/E2/E1 switch on back panel of auto-scaler to E2.
AUDIO/OFF switch on back panel of auto-scaler to AUDIO.
auto-scaler B/ACCU/A/OFF switch to A.
auto-scaler MAN/AUTO switch to MAN.
auto-scaler X MEMORY switch to 1.
calculator OFF/ON switch to ON.
calculator MAN/TRACE/NORM switch to NORM.
calculator PRGM/RUN switch to RUN.
5-57
