TM 5-6675-323-14
6-16.3 Replace Main Power Switch.
MOS: 41B, Topographic Instrument Repair Specialist
TOOLS: 9/64 in. Flat Tip Screwdriver
P o w e r Switch
SUPPLIES:
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing equipment.
T u r n power off and unplug power cord.
a.
b.
Loosen quick-disconnect screws and remove front cover.
c.
Release switch from bezel retaining clip.
d.
Tag and disconnect wires from switch.
e.
Connect wires to new switch.
f.
Insert switch into bezel retaining clip.
Reinstall front cover and secure with quick disconnect screws.
9.
P l u g in power cord and turn power on.
h.
6-48
