TM 5-6675-323-14
5-6.2 O p e r a t i n g P r o c e d u r e s .
Mount film reels.
a.
NOTE
In the following steps, 7.0 cm and 5 in. (12.7 cm) film is mounted. If
9.5 in. (24.13 cm) film reels are used, center idler bracket is removed
and film reel spool is mounted between crank handles.
(1) Move all four aluminum spindle locking knobs upward to detent position.
(2) Insert film supply reel on lower idler spindle and slide lower crank
spindle toward center until crank spindle engages supply reel. Allow for slight end
play.
(3) Place take-up reel on upper idler spindle. Then slide upper crank
spindle toward center until crank spindle engages take-up reel.
NOTE
Readjust position of bracket, if required, to have proper end play in both
upper and lower reels.
Slight end play is required in both upper and
lower reels.
5-19
