TM 5-6675-323-14
b. Direct pen storage.
(1) Turn off plotter.
(2) Select pen color to be placed in stall 1 and remove cap.
WARNING
To avoid possible injury to fingers, always turn plotter off when directly
storing pens.
(3) Place pen tip into round boot at base of stall.
(4) Press pen down and in gently until holder snaps in place.
(5) Check that pen color shows through hole in front panel above pen.
(6) Repeat this procedure for remaining pens.
NOTE
P e n s may be removed from stalls by moving metal lever to right of pen
with one hand, grasping pen between thumb and index finger of other hand,
and pulling out and up.
(7) Turn LINE power switch on.
3-172
