TM 5-6675-316-14
3-198
dk.
dl.
dm.
dn.
do.
dp.
dq.
dr.
ds.
dt.
du.
dv.
dw.
dx.
dy.
dz.
ea.
eb.
ec.
ed.
Hold limit switch cams clear of trip dog.
Slide Y-carriage onto Y-rail past trip dog.
Reattach end plate.
Reattach stop.
Move Y-carriage to rear of Y-rail.
Install tensioning device.
Mount fine adjustment device on Y-rail.
Raise arrest stop pin.
Slide device into arrest.
Lower stop pin into hole in shaft of device.
Adjust Y-carriage bearing screws to allow Y-carriage to move easily,
and with no restrictions.
Move Y-carriage to mid-position on Y-rail.
Remove socket head capscrews from end plate at left end of X-rail.
Remove end plate.
Remove socket head capscrews from rubber stop at left end of X-rail.
Remove stop.
Remove socket head capscrews from X-carriage tensioning device.
Remove device.
Move X-carriage motor locking lever to right.
Slide motor mount
When mounting X-carriage,
may result.
Limit switch
trip dog.
ee.
Loosen X-carriage
to right.
CAUTION
do not force movement or damage to gears and rack
cams must be held back to prevent damage to
bearing adjustment screws.
