TM 5-6675-316-14
3-194
bx.
by.
bz.
ca.
cb.
cc.
cd.
ce.
cf.
cg.
ch.
ci.
cj.
ck.
cl.
Serious
to move
cm.
cn.
co.
cp.
Raise front of controller enough to remove front two rubber shocks,
Remove shocks.
Lower controller.
Raise rear of controller enough to clear rear shock
Slide controller forward enough to remove main body
operators console cable.
Remove cables.
Remove controller with attached mounting plate.
Remove mounting plate.
Reinstall mounting plate on stand.
bolts.
cable and
Remove operators console from top of sealing machine located on
middle shelf.
Remove defective machine or components from section.
Remove screws on wooden panel on bottom of new table frame.
Remove wooden panel.
Attach legs to brace assembly at locations as per numbers on bottom of
legs.
Attach brace assembly with legs to shock mounts.
injury may occur
this equipment.
WARNING
unless an adequate
Four personnel are
number of personnel are used
required to carry frame.
Position frame on legs with frame corners matching leg numbers.
Locate socket head capscrews for legs.
Attach frame to legs with screws.
Install lighting assemblies into frame.