TM 5-6675-316-14
Install four side panels.
3-200
eu.
ev.
ew.
ex.
ey.
ez.
Secure side panels by rotating retaining screws one-half turn to
right.
Attach main body cable, ground wire, and other cables to center left
of table with plastic harness.
Install mounting plate to bottom of teletypewriter with four nuts and
washers.
Install teletypewriter with plate attached onto shock mounts on
shelf, using four nuts and washers.
Connect cable to cable connector on left side of drafting table
top
where
tagged for teletype.
fa.
Install mounting plate to DSP-2 controller with four nuts and washers.
fb. Remove front two shock mounts on bottom shelf.
