3-192
TM 5-6675-316-14
ay.
Remove front panels.
az.
Remove screws from wooden
ba. Remove wooden panel.
bb. Loosen plastic horizontal
glass.
panel located under table.
adjustment screws located around edge of
bc.
From underside of table, push glass up approximately one inch.
bd. Holding glass at each side, lift to clear machine frame.
NOTE
Store glass in a secure area.
be. Remove glass.
bf. Remove fluorescent lamps.
bg.
Reinstall wood panel.
WARNING
High voltages that are capable of causing death may be stored in
capacitor after power is removed.
Be sure capacitor is discharged and
reduced to zero volts.
bh.
bi.
bj.
bk.
bl.
bm.
bn.
bo.
bp.
Tag and remove wires from capacitor on side of card
Remove two nuts from ribbon cable connector mounted
table.
Remove mount with ribbon cables attached.
Tag and disconnect wiring from card cage.
cage under table.
on left side of
Remove
Remove
Remove
Remove
Remove
socket head capscrews holding card cage to table frame.
cage.
digitizing keyboard.
two capscrews and keyboard stand.
socket head capscrews from all legs.
