TM 5-3610-287-24
2-65.
REPAIR PERSONNEL/EQUIPMENT DOOR (CONT)
At equipment door, remove screw (1), spring (2), and knob (3) from
1.
security bolt (4). Remove security bolt locking bar (5).
2.
Remove screws (6) inside security bolt bracket (7). Remove security
bolt bracket (7).
3.
Install new security bolt bracket (7) with screws (6).
4.
Slide new security bolt locking bar (5) into new security bolt
bracket (7).
5.
Install new knob (3), new spring (2), and new screw (1).
Ensure proper
To test operate, close and latch security bolt.
6.
alignment and seal of equipment door.
REPLACE WINCH ASSEMBLY
Installation
Removal b.
This task covers: a.
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Socket wrench set
Flat-tip screwdriver
Materials/Parts
Winch assembly, 54-0207
2-207
