TM 5-3610-287-24
2-65.
REPAIR PERSONNEL/EQUIPMENT DOOR (CONT)
1.
Open personnel door.
2.
Remove roll pin (1) and inner door handle (2).
3.
Remove screws (3) and outer door handle assembly (4).
WARNING
CHEMICAL HAZARD. Use rubber cement thinner in a well-
ventilated area. Failure to do so may result in damage to
respiratory system. Wear gloves and goggles to prevent
injuries to skin and eyes.
Scrape adhesive off personnel door. Remove residue with rubber cement
4.
thinner and wipe dry.
5. Lubricate new outer door handle assembly (4) with a few drops of
engine lubricating oil.
2-205
