TM 5-3610-287-24
REPAIR INCLINOMETER ASSEMBLY (CONT)
2-43.
WARNING
CHEMICAL HAZARD. Use rubber cement thinner in a well-
ventilated area. Failure to do so may result in damage to
respiratory system. Wear gloves and goggles to prevent
injuries to skin and eyes.
Using rubber cement thinner , clean residue from Section body.
4.
WARNING
CHEMICAL HAZARD. Use silicone compound in a well-ventilated
area. Silicone compound is harmful to eyes and skin. In
case of contact with eyes, immediately flush eyes with water
for 15 minutes, then seek medical help. In case of contact
with skin, wipe off with dry cloth, then wash with soap and
water.
5. Apply silicone compound to new inclinometer cover assembly (2) at hinge
(3) and place new seal (5) on inclinometer cover hinge (3).
6.
place with bailhead fastener (4) and align holes in hinge with holes in
Section body.
7. Install new rivets (1) to inclinometer cover hinge (3).
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Cross-tip screwdriver
Pliers
Socket wrench set
Hammer
Pin punch
2-202