TM 5-3610-287-24
2-66. REPLACE WINCH ASSEMBLY (CONT)
1. Remove both swivel blocks (1).
2.
Remove screws (2) and recessed lifting ring (3).
Remove hex bolt (4), lockwashers, and angle mounting block (5).
3.
Remove hex bolts (6), lockwashers, and winch mounting plate (7).
4.
INSTALLATION
NOTE
It may be necessary to assemble winch assembly (para 2-67)
before installation.
1. Install winch mounting plate (7), hex bolts (6), and lockwashers.
Install angle mounting block (5), hex bolts (4), and lockwashers.
2.
Install recessed lifting ring (3) with screws (2).
3.
2-208
