TM 5-3610-287-24
2-63. REPAIR INCLINOMETER ASSEMBLY (CONT)
1.
Open inclinometer cover (1).
2.
Scrape seal (2) from inclinometer cover (1)
WARNING
CHEMICAL HAZARD. Use rubber cement thinner in a well-
ventilated area. Failure to do so may result in damage to
respiratory system. Wear gloves and goggles to prevent
injuries to skin and eyes.
3.
Using rubber cement thinner , clean adhesive residue from inclinometer
cover (1).
4.
Apply adhesive to inclinometer cover (1) and place new seal (2) on
inclinometer cover (1).
5.
Close inclinometer cover (1).
COVER
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Flat-tip screwdriver
Portable electric drill
Twist drill set
Rivet gun (appendix B, section III, item 10)
Scraping knife (appendix B, section III, item 9)
2-200
