TM 5-3610-287-24
2-26.
REPAIR AIR CONDITIONER/HEATER MOUNTING BRACKET (CONT)
1.
Along drain tube (1), cut tiedown straps (2).
2.
Remove drain tube (1) from air conditioner/heater (3) by loosening hex
nut (4).
Remove hex nut (4) from old drain tube (1).
3.
4.
Thread new drain tube (1) through hex nut (4) and slide on new
ferrule (5).
CAUTION
Finger-tighten nut before wrench tightening to avoid
cross-threading. Failure to do so my damage equipment.
Install new drain tube (1) to air conditioner/heater (3) with hex
5.
nut (4). Finger-tighten hex nut (4), then wrench-tighten.
Install drain tube (1) to Section body and mounting bracket with tie-
6.
down straps (2).
7.
Paint drain tubes (1) and tiedown straps (2) in accordance with
TM 43-0139.
REPLACE WALL STORAGE CABINET
Removal b. Installation
This task covers: a.
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Socket wrench set
Cross-tip screwdriver
Materials/Parts
Wall storage cabinet, MIL-C-400600/1, Type 1
2-71
