TM 5-3610-287-24
2-28.
REPAIR WALL STORAGE CABINET (CONT)
3.
Remove hex nut (4), striker (2), and hex nut (5) behind striker (2).
Remove nuts (6), screws (7), and handle and latch assembly (8).
4.
Place new handle and latch assembly (8) on wall storage cabinet door.
5.
Install handle and latch assembly (8) with nuts (6) and screws (7).
6.
Install hex nut (5), striker (2), and hex nut (4) on handle and latch
assembly (8).
7.
Close cabinet doors and check position of striker. Adjust striker in
or out with hex nuts (4) and (5).
8.
Install rods (3) with cotter pins (1) and flatwashers.
9.
Close cabinet doors.
REPLACE ROLLER STORAGE RACK
This task covers: a. Removal b. Installation
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Portable electric drill
Socket wrench set
Cross-tip screwdriver
Rivet gun (appendix B, section III, item 10)
Materials/Parts
Top roller rack assembly, 13226E7838
Lower roller rack assembly, 13226E7876
Rivets, MS20600-MP4W6 (4 required)
Lead pencil (appendix C, item 13)
2-74
