TM 5-3610-287-24
2-24.
REPLACE FOLDING LADDER SUPPORT BRACKETS (CONT)
INSTALLATION
Install strap assembly (1) on new mounting bracket (2) with bolt (5)
1.
and lockwasher.
WARNING
CHEMICAL HAZARD. Use adhesive in a well-ventilated area.
Adhesive is harmful to eyes and skin. In case of contact
with eyes, immediately flush eyes with water for 15 minutes,
then seek medical help. In case of contact with skin, wipe
off with dry cloth, then wash with soap and water.
Apply adhesive to back of new rubber seal (4).
2.
Position new rubber seal (4) on new support bracket (2).
3.
Install support bracket (2) with bolts (3) and lockwashers.
4.
Place folding ladder on support brackets (2) and secure with
5.
straps (l).
REPAIR FOLDING LADDER SUPPORT BRACKETS
Strap and
Folding ladder support brackets are repaired by replacing:
buckle assembly/strap assembly
STRAP AND BUCKLE ASSEMBLY/STRAP
ASSEMBLY
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Portable electric drill
Twist drill set
Socket wrench set
Rivet gun (appendix B, section III, item 10)
Materials/Parts
Strap and buckle assembly, 13226E7833-3
Strap assembly, 13225E3865
Rivets, MS20600-AD6W4
2-68
