TM 5-3610-287-24
2-23.
REPAIR BOARDING LADDER ASSEMBLY (CONT)
1.
Remove S-hook (1) from ladder (2) and lanyard (3).
2.
Remove S-hook (4) from retaining ring (5) and lanyard (3).
3.
Remove quick-release pin (6) from mounting bracket (7).
4.
At mounting bracket (7), install new quick-release pin (6).
Install new S-hook (4) on new lanyard (3) and new retaining ring (5).
5.
Install new S-hook (1) on ladder (2) and new lanyard (3).
6.
REPLACE FOLDING LADDER SUPPORT BRACKETS
This task covers:
a. Removal b. Installation
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Socket wrench set
Scraping knife (appendix B, section III, item 9)
Materials/Parts
Folding ladder support bracket, 13226E7936-1
Folding ladder support bracket, 13226E7936-2
Rubber seal, 13227E5688 (2 required)
Adhesive (appendix C, item 1)
Rubber cement thinner (appendix C, item 33)
2-66
