TM 5-3610-287-24
2-29. REPLACE ROLLER STORAGE RACK (CONT)
INSTALLATION
1.
Install new top roller rack assembly (7) on top roller rack mounting
plate (8) with bolts (5), lockwashers, flatwashers, and nuts (6). Do
not tighten.
2. Position pencil sharpener (1) on side of top roller rack assembly (7)
and mark holes for rivets.
3.
Drill holes for pencil sharpener (1) and install with rivets (2).
4.
Install new lower roller rack assembly (4) with screws (3).
5.
Install one roller on each side of roller rack assembly.
6. Adjust top roller rack assembly (7) and tighten bolts (5).
2-30. REPAIR ROLLER STORAGE RACK
Roller storage rack is repaired by replacing: Wood rack and rubber pad
WOOD RACK AND RUBBER PAD
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Cross-tip screwdriver
Offset cross-tip screwdriver
Materials/Parts
5-hole lower wood rack, 13226E7878 (2 required)
4-hole lower wood rack, 13226E7879
Rubber pad, MIL-R-6855, CL-1, GR-60 (2" x 17") (3 required)
2-76
