TM 5-3610-287-24
2-21.
REPAIR EMERGENCY LIGHT SET (CONT)
Drill out rivets (7).
5.
Tag and remove wires (8) from circuit board (9).
6.
Remove
7.
Tag and cut wires (10) above connectors (11).
transformer (12).
8.
Install new transformer (12) with rivets (7).
9.
Connect wires (10) with new wire nuts (13).
Connect wires (8) to circuit board (9).
10.
11.
Install battery (6) and connect wires, observing polarity.
Install emergency light cover (4) on emergency light set (5) with
12.
screws (3).
13.
Install emergency light assembly (2) on wall with hex bolts (1),
lockwashers, and flatwashers.
Plug in emergency light power cord and turn on emergency light set.
14.
15.
Push TEST button down to test operate.
Installation
This task covers: a. Removal b.
INITIAL SETUP
Tools
Light machine repair tool kit (appendix B, section III, item 11)
Flat-tip screwdriver
Cross-tip screwdriver
Materials/Parts
Mirror, 13226E7937
Bead chain coupling end, NAS1201C6B
Bead chain, HAS1201C6-12A
2-61
