TM 5-3610-287-24
REPAIR EMERGENCY LIGHT SET (CONT)
2-21.
Partially remove circuit
Remove screws (7) and starwashers.
5.
board (6).
Tag and remove wires (8). Remove circuit board (6).
6.
7.
Install wires (8) on new circuit board (6).
Install circuit board (6) with screws (7) and starwashers.
8.
Install bulb (5) on circuit board (6).
9.
Install battery (4) and connect wires, observing polarity.
10.
Install emergency light cover (2) on emergency light set (3) with
11.
screws (1).
Plug in emergency light power cord and turn on emergency light set.
12.
Push TEST button down to test operate.
13.
INITIAL SETUP
Tools
Light machine repair took kit (appendix B, section III, item 11)
Flat-tip screwdriver
Portable electric drill
Twist drill set
Pliers
Rivet gun (appendix B, section III, item 10)
Materials/Parts
Transformer, 208P5
Rivet, MS20600A4W4 (2 required)
Wire nut, 2978 (2 required)
Masking tape (appendix C, item 29)
Lead pencil (appendix C, item 13)
2-59
