TM 5-3610-287-24
2-21.
REPAIR EMERGENCY LIGHT SET (CONT)
WARNING
ELECTRICAL HAZARD. Unplug emergency light power cord before
replacing light bulb. Failure to do so may result in death
or serious injury.
1.
Turn off emergency light and unplug power cord.
2.
Insert screwdriver in notch on plastic retaining ring (1) and remove.
3.
Remove emergency lamp lens (2) from lamp holder (3).
4.
Push in and turn emergency light bulb (4) to remove from socket.
Install new emergency light bulb (4) in socket.
Push in and turn to
5.
secure.
6.
Install emergency lamp lens (2) in lamp holder (3).
7.
Install plastic retaining ring (1).
2-55
