TM 5-3610-287-10
BLACKOUT LIGHT MAINTENANCE INSTRUCTIONS (CONT)
3-6.
REPAIR
WARNING
ELECTRICAL HAZARD. Turn off power to blackout light
before replacing bulb. Failure to do so could result in
death or serious personal injury.
1.
Turn BLACKOUT LIGHTS switch to OFF.
2.
Remove two thumbscrews (1) and remove cover (2) from blackout light
assembly (3).
If necessary, remove clear light bulb (4) from locking socket by
3.
pushing and turning.
4.
Unscrew red light bulb (5) from socket.
5.
Install new red light bulb (5) in socket.
Install new clear light bulb (4) in socket by pushing and turning.
6.
7.
Secure cover (2) on blackout light assembly (3) with two thumb-
screws (1).
8.
Turn BLACKOUT LIGHTS switch to ON.
3-10