TM 5-3610-287-10
3-8.
SIDE LIGHT MAINTENANCE INSTRUCTIONS (CONT)
WARNING
ELECTRICAL HAZARD. Turn off side light power switch and
circuit breaker. Failure to do so could result in death
or serious injury.
1.
Turn side light power switch and circuit breaker to OFF.
2.
Remove two screws (1) and side light cover (2) from side light
assembly (3).
3.
Remove light bulb (4).
4.
Install new light bulb (4).
5.
Position side light cover (2) on side light assembly (3), and secure
with two screws (1).
6.
Turn power switch and circuit breaker to ON.
VENTILATION DUCTS MAINTENANCE INSTRUCTIONS
This task covers:
Service
INITIAL SETUP
Tools
Flat-tip screwdriver (appendix B, section III, item 22)
Materials/Parts
Rag (appendix D, item 31)
3-13
