TM 5-3610-286-20
2-13.
Solution Container Assembly.
This task covers: a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
Equipment Conditions
1.0x6.0x0.5 mm flat-tip screwdriver
Solution container empty
13 mm combination wrench
Tube assembly removed (para. 2-13)
a. Remove. (figure 2-5)
(1) Loosen hex-head screw (1) and hose clamp (2) and remove hose (3) from clamp (2).
(2) Loosen retaining strap (4) and remove container (5) from mounting
shelf (6).
(3) Loosen hose clamp (7) and remove hose (3).
b. Repair.
(1) Replace cracked or leaking container (5).
(2) Replace cover (8) if cracked or if gasket is missing or worn.
(3) Replace cracked or leaking hose (3).
c. Install.
(1) Install hose (3) with hose clamp (7) on container (5). Tighten hose clamp (7).
(2) Install container (5) on mounting shelf (6) and secure with retaining strap (4).
(3) Install hose (3) in hose clamp (2) and tighten hex-head screw (1).
NOTE
FOLLOW-ON MAINTENANCE:
(1) Install tube assembly (para. 2-12).
(2) Refill solution container.
2-60
