TM 5-3610-286-20
2-14.
Solution Container Shelf Assembly.
This task covers:
a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
Equipment Conditions
6 mm hex key
Solution Container removed (para. 2-13)
11 mm combination wrench
13 mm combination wrench
No. 3 x 6 in. cross-tip screwdriver
a. Remove. (figure 2-6)
(1) Remove two hex-head screws (1), lockwashers (2), and washers (3).
(2) Remove socket-head bolt (4), inner container spacer (5), washer (6), Iockwasher (7)
and nut (8), and remove container shelf (9) from mounting bracket (10).
(3) Remove three countersunk cross-head screws (11) and remove mounting bracket (10)
from main guard (12).
(4) Remove socket-head bolt (13) and retaining strap (14).
NOTE
Retaining loop (15) for strap and buckle (16) is riveted to container shelf.
b. Repair.
(1) Replace torn or frayed retaining strap (14).
(2) Hammer out bent container shelf (9).
(3) Replace missing container spacers (5).
(4) Replace stripped rivnuts (17).
NOTE
Outer container spacer is higher than inner spacer to tilt solution container for
complete emptying.
c. Install.
(1) Install retaining strap (14) and socket-head bolt (13).
(2) Install mounting bracket (10) on main guard (12) and install three cross-head
screws (11).
2-62
