TM 5-3610-286-20
2-15.
Ink Fountain Guard Assembly.
This task covers:
a. Remove
b. Repair
c. Install
INITIAL SETUP
Tools
6 mm hex key
a.
b.
c.
Remove. (figure 2-7)
(1) Loosen thumbscrew (1).
(2) Remove socket-head screw (2) and ink fountain guard (3) from stud (4).
Repair.
(1) Remove socket-head screw (5), separate collar (6) and inspect collar for wear.
(2) Replace collar (6) and socket-head screw (5).
Install.
(1) Holding Ink fountain guard (3) in closed position, slide cam end over stud (4) and install
socket-head screw (2).
(2) Tighten thumbscrew (1) (if press is to be transported).
2-64
