TM 5-3610-286-20
2-12.
Solution Container Tube Assembly.
This task covers:
a. Remove
b. Repair
c. Install
INITAL SETUP
Tools
Equipment Conditions
1.0 x 6.0x 0.5 mm flat-tip screwdriver
Solution container empty
22 mm combination wrench
a. Remove. (figure 2-4)
(1) Loosen mounting clamp screw (1) and remove tube extension (2) from mounting
bracket (3).
(2) Loosen hose clamp (4) and remove tube assembly from solution container hose (5).
(3) Unscrew tube extension (2) from valve (6).
b. Repair. Replace leaking or binding valve (6).
c. Install.
(1) Install tube extension (2) on valve (6).
(2) Install valve (6) into solution container hose (5) and tighten hose clamp (4).
(3) Install tube extension (2) into mounting bracket (3) and tighten mounting clamp
screw (1).
NOTE
FOLLOW-ON MAINTENANCE:
Refill solution container.
2-58
