TM 5-3610-286-20
2-81.
Transfer Drum (cont).
b. Inspect.
(1) Make certain all star wheels and support discs are accounted for.
(2) Inspect for broken springs or bent rods.
(3) Inspect strap guides for damage or missing setscrews.
c. Repair.
(1) Replace weaker broken springs.
(2) Replace bent or damaged strap guides.
(3) Replace worn star wheels and supporting discs.
d. Install. (figure 2-227)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
2-456
Position cam gripper (1) on press and install four ribbed washers (2) and four socket-
head screws (3).
Position each chain guide (4) on press and install two ribbed washers (5) and two socket-
head screws (6) in each.
Position two brackets (7) on bar (8) and install two socket-head screws (9).
Install two socket-head screws (10) in each bracket (7) and install brackets with bar (8)
on chain guides (4).
Slide four strap guides (11) on square bar (12) and install one spring (13) and one set
screw (14) in each guide.
Position square bar (12) and two support brackets (15) in press and install two socket-
head screws (16) in each bracket.
Aline halves of quadrants (17) on shaft with marks made during removal, and install two
socket-head screws (18) in each quadrant.
Install support discs (19) and star wheels (20) on each rod (21).
Position spring (22) on each rod (21) and install spring tension pin (23).
Install each rod (21) in associated quadrants (17).
NOTE
FOLLOW-ON MAINTENANCE:
Close delivery guard (TM 5-3610-286-10).