TM 5-3610-286-20
2-82.
Sheet Smoother and Accessories (cont).
b. Repair. (figure 2-229)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
Remove four spring pins (1), and two clamps (2).
Remove tommy screws (3) from clamps (2).
Remove knurled screw (4), spring (5), hex screw (6), bar (7), and guide plate (8) or
caged ball assembly (9).
Remove two slotted screws (10) and caged balls (11).
Remove C-clip (12), pin (13), and rollers (14) or brushes (15).
Remove clamp (16) and tommy screw (17).
Replace items that are bent, broken, cracked, or show signs of distortion or excessive
wear.
Replace clamp (16) and tommy screw (17).
Aline brushes (15) or rollers (14), and install pin (13) and C-clip (12).
Replace caged balls (11) and two slotted screws (10).
Install guide plate (8) or caged ball assembly (9), bar (7), hex screw (6), spring (5),
and knurled screw (4).
Replace tommy screw (3) in clamp (2).
install two clamps (2) and spring pins (1).
2-460
