Figure 2-225.
TM 5-3610-286-20
b. Adjust. (figure 2-225)
(1) Loosen motor mounting bolts.
(2) Place a straight edge of a least two feet in length against the motor pulley and the flywheel
to assure that the belt is perfectly alined.
(3) Adjust belt tension using tension adjusting screws until pressing down on the belt will
deflect it no more than 1/4 inch (5 mm).
(4) Tighten motor mounting and tension adjusting bolts.
NOTE
FOLLOW-ON MAINTENANCE:
Install belt guard (para. 2-17).
2-453
