Figure 2-177.
TM 5-3610-286-20
2-69.
Impression Cylinder Control Mechanism (cont).
(5) Impression OFF cam assembly. (figure 2-177)
(a) Replace needle bushing (1) in cam lever (2).
(b) Position shims (3) and plate (4) on cam lever (2) and replace socket-head screw (5).
(c) Replace roller shaft (6) and ball bearing (7) on cam lever (2), and replace tapered
pin (8).
(d) Replace needle bushing (9) in rod head (10).
(e) Replace rod head (10) on spring rod (11) and replace spring tension pin (12).
(f) Replace compression spring (13) on spring rod (11).
(g) Position spring rod assembly on cam lever (2) and replace pin (14).
2-376
