Table 1-2. Equipment Data (cont).
TM 5-3610-286-20
. .
I
Component
I
Characteristics
Pile Lift Motors (3)
220V ac, 1.8A, 3-phase, 60 Hz
Rated: 0.33kW at 1580 RPM
NOTE
Two feeder pile lift and one delivery pile lift.
Feeder Suction Motor
220V ac, 5.6A, 3-phase, 60 Hz
Rated: 1.3kW at 3400 RPM
Suction Slowdown Motor
220V ac, 0.24A, 3-phase, 60 Hz
Rated: 0.03kW
Static Eliminator
220V ac, 0.12A, 60 Hz
Circuit Protection
Main Circuit Fuses (3)
35A, cartridge type
Main Motor Fuses (3)
25A, cartridge type
Transformer Control Fuses (3)
6A, cartridge type
Rectifier Fuse
6A, cartridge type
Electronic Control Box Fuses (3)
2A, 4A, 5A, piug type
Inductor Light Fuse
4A, cartridge type
Static Eliminator Unit Fuse
6A, cartridge type
Section III. Principles of Operation
Para.
Page
1-10.
Principles of Operation . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
1-11.
Supporting Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15
1-12.
Control and Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
1-13.
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
1-10.
Principles of operation. The TSS Printing Press is a high speed, rotary offset press which
prints on any of a large variety of paper types and thicknesses. The press prints from a metal printing
piate produced by a photolithographic process.
a. Lithography. In lithographic printing, the matter to be printed is not raised above the surface of
the printing plate (as in letterpress printing) nor sunk below the surface of the printing plate (as in
intaglio printing). The matter to be printed is transferred, by some means, to the surface of the plate.
1-14
