Figure 2-103.
TM 5-3610-286-20
(c) Install three leads at points T1, T2, and T3 in electrical box (4) and ground wire (6).
(d) Install cover (7) and four machine screws (8) on electrical box (4).
(e) Install angle bracket (9) and two cross-head screws (10).
(f) Install washer (11), Iockwasher (12) and hex-head screw (13) into motor (1).
(g) Install hose (14).
(h) Install center sheet stop (15) and five socket-head screws (16).
2-247
