Figure 2-102.
TM 5-3610-286-20
2-48.
Suction Valve Housing Assembly and Motor (cont).
(2) Motor. (figure 2-102)
(a)
(b)
(c)
(d)
(e)
Remove SIX nuts (1) and washers (2).
Remove cover (3) with filter (4).
Wash filter with soapy water and shake dry.
Replace cover (3) with filter (4).
Replace six nuts (1) and washers (2).
d. Install.
(7) Motor. (figure 2-103)
(a) Install motor (1) and two hex-head screws (2).
(b) Install wire cable (3) into electrical box (4) and tighten lock nut (5).
2-246
