TM 5-3610-286-20
2-48.
Suction Valve Housing Assembly and Motor (cont).
(2) Suction valve housing assembly. (figure 2-104)
(a) Install suction valve support (1) and two hex bolts (2).
(b) Install two washers (3) and two hex-head bolts (4).
(c) install two bar halves (5) and pin (6).
(d) Install two spring (7).
(e) install four hoses (8) and upper hose clamps (9).
(f) Install valve housing (10), hex-head cap screw (11) and hex nut (12).
(g) Install large hose (13) in valve housing (10) and attach other end of hose to suction
motor.
(h) Install four hoses (8) and Iower hose clamps (14) on valve housing (10).
2-248
