TM 5-3610-286-20
2-48.
Suction Valve Housing Assembly and Motor (cont).
(2) Motor. (figure 2-100)
(a) Remove five socket-head screws (1) and center sheet stop (2).
(b) Remove hose (3).
(c) Remove hex-head screw (4), washer (5), and lockwasher (6).
(d) Remove two cross-head screws (7) and angle bracket (8).
(e) Remove four machine screws (9) and cover (10) from electrical box (11).
(f) Remove ground wire (12) and three leads at points T1, T2, and T3.
(g) Loosen lock nut (13) and remove wire cable (14) from electrical box (11).
(h) Remove two hex-head screws (15) and remove motor (16).
2-242
