TM 5-3610-285-14
(3)
Loosen setscrew and remove TRANSPORT SPEED control knob.
(4)
Remove screws and front control panel.
(5)
Remove screws and drain valve handles.
(6)
Remove screws and drain header cover.
(7)
Remove fixer and developer pump splash cover.
(8)
Drain fixer tank.
(9)
Loosen three hose clamps securing hoses nearest the pump assembly.
NOTE
It is not necessary to remove the phenolic block that supports the pump housing.
(10)
Remove two screws and bracket, and release the pump assembly from processor frame.
(11)
Move pump assembly as necessary to remove three hoses. Remove hoses and move pump assembly
aside.
(12)
Cut wire ties securing wiring to processor frame. Trace pump wiring to electrical control panel.
5-189
