TM 5-3610-285-14
b.
Remove left access panel.
c.
Remove retaining screws and control unit cover.
d.
Tag and disconnect wiring from control unit terminal board.
WARNING
High voltages that are capable of causing death may be stored in capacitor after power is removed. Be
sure capacitor is discharged and reduced to zero volts.
e.
Remove four screws and control unit from processor base.
f.
Install new control unit to processor base, and secure with screws.
g.
Reconnect wiring to control unit terminal board.
h.
Reinstall control unit cover and left access panel.
i.
Turn on processor circuit breaker.
5-187
