TM 5-3610-253-14
Table 5-17. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S
- Semiannually
A - After
Q - Quarterly
BI - Biennially
For Readiness
ITEM TO BE INSPECTED
lN-
Reporting,
ITEM
TER
Equipment Is
NO.
PROCEDURE
VAL
Not Ready/
Available If:
PAPER CUTTER - Cont
7
Inspect Backgauge and Measurement Display - Cont
B
Pull backgauge control knob outward. Backgauge
10.
Backgauge
rakes should move forward under clamp and stop
does not
short of knife.
move under
clamp.
11.
Press button in center of backgauge control knob.
Move backgauge back approximately halfway.
12.
Press backgauge control knob in until manual
drive gears engage.
13.
Rotate backgauge control knob and backgauge
Backgauge
should move easily, indicating that the brake
does not move
has disengaged.
easily.
5-352
