TM 5-3610-253-14
WARNING
Before releasing the clamp foot pedal, be sure all objects are clear of
piston and angle linkage. Serious injury may occur.
s.
Release the clamp foot pedal.
t.
Rotate piston so that the bleeding screw is back in its original
position.
WARNING
Use care when working around moving V-belts.
Death or serious injury
may occur.
u.
Loosen the bleeding screw on the retarding valves and while performing
a cut, bleed each retarding valve. Tighten the bleeding screw after
the knife reaches the bottom of its stroke.
v.
Using a flashlight, check the fluid reservoir for air bubbles.
w.
If air bubbles or foam are present, this is an indication of a leaking
pipe or fitting. Retighten fittings.
x.
Turn off power.
(1) Turn main power switch to O position.
(2) Using operator key, lock the safety lock.
Remove all rags around undersides of cutter.
y.
5-288