TM 5-3610-253-14
Remove master link in chain and lift out old chain.
e.
f.
Install new chain and master link.
Reinstall paper entry hopper.
g.
h.
Reinstall top cabinet cover.
Reinstall retaining screw and tighten.
i.
Plug in power cord.
Repair Cutting Head.
MOS :
83FJ6, Reproduction Equipment Repairer
PERSONNEL:
Two persons are required for this procedure.
TOOLS :
Flat Tip Screwdriver
Tool Kit, Metric
Socket Set, 3/8 in. Drive 6 mm to 26 mm
3/8 in. Drive Extension, 6 in. long
Hex Bit Set (4 mm to 17 mm)
Hex Head Key Wrench Set (2 mm to 19 mm)
3/8 in. Drive Ratchet
Ball Peen Hammer
SUPPLIES:
Cutter Blades
Spacers
Cutter Separators
WARNING
Death or serious injury may occur from electrical shock unless power
cord is unplugged before servicing.
Change 1
4-39
