TM 5-3610-253-14
f. Unscrew gooseneck and lamp.
Unscrew bezel nut from defective gooseneck and lamp.
g.
h. Thread bezel over lamp wires, screw onto new gooseneck, and install new
gooseneck.
Connect wires with wire nuts (white to white and black to black).
i.
Reinstall cover plate and secure with screws.
j.
k. Plug in power cord.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: 1/2 in. Combination Wrench
3/32 in. Hex Head Key Wrench
Flat Tip Screwdriver
Ball Peen Hammer
SUPPLIES: Spindle
Silicone Spray (Item 27, Appendix E)
Turn power off.
a.
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
b. Unplug power cord.
Loosen thumbscrews and move auto-trip backgage.
c.
d. Remove drift hole cover.
Remove drill bit using drill drift.
e.
2-36