TM 5-3610-253-14
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver, 1/4 in. Tip
Needle Nose Pliers
Flat Tip Screwdriver, 1/8 in. Tip
SUPPLIES: Switch
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing,
c.
Remove motor lag bolts.
d. Remove top motor housing cover by slightly tapping up on cover.
e.
Slide motor housing cover up until power switch can be carefully pulled
out the side without damaging switch wiring.
f. Note position of wiring and. remove wire clips.
Replace wires on new switch and slide switch back into motor housing and
g.
switch guard. Secure with bezel nut.
h. Carefully slide motor cover down and secure with lag bolt.
i.
Plug in power cord.
2-34