ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039-12&P
SECTION III. INSTALLATION OF IPADS INTO UH-60 HELICOPTER
NOTE
Prior to running missions in the UH-60, the plumb bob arm and stop brackets
from the UH-60 installation kit must be installed on the IPADS frame. Once
these components are installed they do not need to be removed. Stow the UH-
60 CDU indexer and power cable in one of the storage compartments until
needed.
a.
Install Stop Brackets.
(1) Using a cross tip screwdriver, install both vertical and horizontal stop brackets, figure 2-22.
(2) Tighten screws.
Vertical Stop
Bracket
Screws
Horizontal Stop
Bracket
